How many cylinders do you run?
Gas Cylinder Cages South Africa are where the bottles live: a ventilated, lockable enclosure bolted to a wall or a slab, outside, clear of windows, doors, drains and the boundary. They stop a cylinder being walked off, stop it being knocked over, and keep it out of a cupboard where gas could collect. Say how many bottles you run and roughly where they stand now, and compare quotations.
Super easy & fast
- See the cage and the fitting priced separately, so you never pay too much.
- Send the same requirement to several gas installers, and quotes come back fast.
- From LEADERR APPROVED providers, vetted and backed by many verified 5-star reviews. Peace of mind that the position is checked before anything is bolted down.
Say how many bottles you run and get cage quotes.
Get the Best QuoteGas Cylinder Cages Prices
Ballpark figures so you can check a quotation.
| Item | Ballpark price |
|---|---|
| Two cylinder cage, galvanised, fitted | R1,800 - R4,000 |
| Four cylinder cage, galvanised, fitted | R3,000 - R7,500 |
| Powder coated cage, two cylinders | R2,500 - R5,500 |
| Stainless or marine grade cage | R5,000 - R14,000 |
| Concrete plinth cast for a cage | R900 - R3,500 |
| Built in masonry bottle housing | R2,500 - R8,000 |
| Manifold and automatic changeover | R1,200 - R4,500 |
| Relocating an existing bottle bank | R1,500 - R6,000 |
| Certificate of conformity after a move | R650 - R1,800 |
Prices JUST UPDATED. Ballpark figures, rounded, excluding VAT. They reflect typical South African gas installation rates. They are not our prices or quotations, and no provider is bound by them. Gas work is quoted on the APPLIANCE and on the LENGTH AND ROUTE of the gas pipe that feeds it, so confirm what each quotation includes, such as the site visit, the appliance itself, the pipe, fittings and regulator, the flue and where it terminates, the cylinders and their cage, the certificate of conformity, and whether taking an old unit away is in the figure.
What Decides the Price
- How many cylinders. Two, four or a bank, and what size they are.
- The material. Galvanised steel, powder coated, or stainless on the coast.
- Fixed to what. A brick wall, a concrete slab or a plinth that has to be cast.
- Whether it is built in. A masonry housing is a builder rather than a supplier.
- The gas work. Manifold, changeover and the pipe leaving the cage.
Where a Cage May Stand
- Outside, always. Never in a garage, a store or a closed cupboard.
- Ventilated low down. Gas is heavier than air and settles at the bottom.
- Clear of openings. Set distances from windows, doors and air inlets.
- Clear of drains. A leak must not find its way into one.
- Off the boundary. And out of the way of a vehicle that could reverse into it.
What People Get Wrong
- Boxing it in. A solid enclosure with no low vent defeats the point.
- Under a window. The commonest siting fault on a retrofit.
- On soft ground. A cylinder has to stand upright on something firm.
- No lock. Cylinders walk, and a deposit goes with them.
- Too small for a refill. No room to swing a full 48 kg bottle into place.
Get a price for your own wall rather than a range.
Get the Best QuoteWhat Affects the Price
- Cylinder count and size. A bank of 48 kg bottles is a different structure.
- The material. Coastal sites want stainless or heavy galvanising.
- What it bolts to. A slab that has to be cast is a separate line.
- Whether gas work is included. The manifold and the pipe out are often extra.
- Access for refills. A cage a delivery cannot reach gets moved later.
- Whether anything is relocated. Moving bottles usually needs recertifying.
What to Include in Your Request
- The address. Suburb and town, so you reach suppliers who deliver there.
- How many cylinders. And what size, 9, 19 or 48 kg.
- Where they stand now. Or where you would like them to.
- What they would fix to. Brick wall, concrete, or open ground.
- Whether you are on the coast. It decides the material rather than the size.
- Photos. The wall or the spot, with the surroundings in the shot.
Before You Buy a Cylinder Cage
- Ask about the ventilation. Low openings matter more than high ones.
- Ask where they would put it. Siting is the part a supplier cannot do by email.
- Ask about the fixings. Into brick, into a slab, or onto a cast plinth.
- Ask about refill access. A full 48 kg bottle needs room to be swung in.
- Ask about the lock. And whether the delivery driver needs a key.
- Ask whether a CoC is needed. Moving bottles usually means recertifying.
Gas Cylinder Cages FAQs
How much does a gas cylinder cage cost in South Africa?
A galvanised two cylinder cage supplied and fitted is commonly R1,800 to R4,000, and a four cylinder one R3,000 to R7,500. Powder coating adds a little, and a stainless or marine grade cage for a coastal site runs R5,000 to R14,000. A concrete plinth, if one has to be cast, is usually R900 to R3,500.
Do I legally need a cage for my gas bottles?
A cage is not the only way to meet the requirements, but secure, ventilated outdoor storage clear of openings, drains and the boundary is, and a cage is the usual way of achieving it. The installer applies the distances and the arrangement when the certificate is issued, so ask them what your site needs rather than buying a cage and hoping it suits.
Can the cylinders go in the garage?
No. Cylinders belong outside, upright, on a firm base with low level ventilation around them. A garage, a store room or a closed cupboard allows gas from a slow leak to collect at floor level, which is the exact situation the rules exist to prevent. It is one of the commonest faults found at a certificate inspection.
What size cylinders should I use?
A 9 kg bottle is easy to carry to a refill point and suits a stove alone. A 19 kg bottle is the common household size for a geyser or a braai, and 48 kg bottles are used where there is a lot of demand and a delivery arrangement. Most installations run two bottles on a changeover so nothing runs out mid shower.
Can I move my existing bottles somewhere better?
Yes, and it is often worth doing if they are under a window or in the wrong place. Moving them means new pipework from the new position and, because the installation has changed, a new certificate of conformity. Ask for the move and the certificate to be quoted together.
Where the bottles stand decides half of what an install costs, and Gas Geyser Hub is the quickest way to get the cage and the gas work quoted together.
Related Services
Get the Best Quote, Fast
Client Reviews
Powered by leaderr

